Industrial Applications

Specific solutions for CONSTRUCTION INDUSTRY, PAINTS, GLUES, FILLERS.

CASAMIX K.10

A multicomponent powder, developed for the manufacture of long-lasting STANDARD REPAIR FILLER . Just by combining K.10 with mineral fillers such as: Calcium carbonate, dolomite, etc., in an aqueous medium and with proper mixing, leads to pastes with excellent characteristics for specific applications of this type of filler and meet the necessary requirements, i.e.: Texture, workability, adhesion, hardness, sandability, etc.

K.10 CASAMIX also incorporates the essential preservative agents in "standard" products to preserve its qualities until the end of the application cycle.

Quantities
Packing

CASAMIX K.30

An additive for use in preparing CRACK FILLERS and COATINGS, from a calcium carbonate base.

CASAMIX K.30 is a product that, by itself, covers the requirements of the finished product, resulting in an excellent paste without lumps. It achieves a good workability, retains well, does not separate and maintains correct application texture for more than 24 hours.

Once the filler is prepared, and given the working open time achieved, CASAMIX K.30 incorporates the essential conservation agents with the objective of preserving its qualities until the end of its use.

Quantities
Packing

CASAMYL AV.65/P

An additive for the cement and plaster industries, specially designed as a complement or partial substitute for cellulose derivatives such as carboxymethyl cellulose (CMC), methyl cellulose (MC), etc.

It is fully compatible with other additives, including among others retardants (citrates, phosphates, etc.).

It is feasible to replace 20-25% of CMC or MC with Casamyl AV.65/P, for mortar or tile adhesive.

Packing

CASANOL NF

A physically and chemically modified starch-based product, developed for the construction and decoration industries (thickeners, adhesives, binding agents, etc.).

Packing

CASAPLAST KO.09

An etherified potato starch derivative with a high degree of substitution and cold water soluble. Because of its non-ionic character, it is highly compatible with divalent ions such as calcium and magnesium. One of its outstanding applications is as a plaster powder additive, used to achieve a specific thickness and/or flow in the pastes.

In projection plasters, where as a result of adding calcium hydroxide their pH is set between 12 and 13, using KO.09 as thickener, increases the viscosity and fluidity of the paste even in small amounts, allowing to slightly lower the cellulose percentage.

Other applications: As a cement and plaster mortar thickener, which does not contribute stickiness and allows lowering the cellulose percentage, giving very good workability. As an improver of the thickening characteristics of the cellulose ethers used in building products such as cements, fillers, tile adhesives, etc. In this case the amount added should be approximately 10% of the cellulose ether quantity.

Application Recommendations
Packing

CASAPLAST KO.18

A modified starch specially developed to facilitate plaster application. It is fully compatible with other additives, such as retardants (citrates, phosphates, etc.), and products to increase water retention (MC, CMC, etc.).

Its main effect is to increase paste consistency immediately after preparation.

Other applications: in products with expanded Perlite, adhesives for plaster, tile adhesives, fillers, etc.

Application Recommendations
Packing

PASTASOL

A adhesive powder that develops in cold water, based on physically and chemically modified starch, particularly suitable for manufacturing tempera paint, in both liquid and powder form.

Application Recommendations
Packing